After lots of life getting in the way.. just started rig jig this weekend. Getting all the material on order, and jigs should be done by the time the 1/4 x 1/4 arrive.
Stay tuned...
Finally Starting
-
jptowey2
- Posts: 26
- Joined: Sun Nov 22, 2015 4:09 pm
Finally Starting
Jim
Hatz Classic Plan #187
Sandwich, MA
Hatz Classic Plan #187
Sandwich, MA
-
HC85
- Posts: 114
- Joined: Sat Aug 03, 2013 5:34 pm
Re: Finally Starting
Congrats! I'm 5 years this October into my project....my second attempt! Enjoy the process!
-
Bitshifter
- Posts: 202
- Joined: Thu Aug 02, 2012 5:12 pm
- Location: Avondale Pa
- Contact:
Re: Finally Starting
If you have a Facebook page post pictures of your progress. It is interesting when Facebook reminds me about something I posted years ago. It is nice to be reminded of your progress. I just recently saw my first rib from 5 years ago and I can walk out into the garage and see what almost looks like an airplane.
Welcome to the group
Welcome to the group
Ed White
HC 154
"In life 10% wrong is failure, in school it's an A"
HC 154
"In life 10% wrong is failure, in school it's an A"
-
alvinsager
- Posts: 89
- Joined: Thu Mar 18, 2010 10:29 am
Re: Finally Starting
Hi Jim,
Sounds great! Life and the restoration of my flying plane has certainly put a damper on my Hatz project. I don't even want to know when I started on it! Now all I have to do is finish building an engine for my Cygnet and I am all Hatz.
Al
Sounds great! Life and the restoration of my flying plane has certainly put a damper on my Hatz project. I don't even want to know when I started on it! Now all I have to do is finish building an engine for my Cygnet and I am all Hatz.
Al
-
mmarien
- Posts: 178
- Joined: Thu Jul 23, 2015 9:50 am
- Location: Saskatoon, Saskatchewan, CANADA
Re: Finally Starting
Congrats Jim. I'm not that far ahead of you with #180. Keep us updated.
Murray Marien - HC 0180
Saskatoon Canada
Saskatoon Canada