HC #86 Update
-
splischke
- Posts: 115
- Joined: Thu Mar 18, 2010 8:41 pm
- Contact:
HC #86 Update
I just finished cutting the finishing the floor boards. It was a bit tedious work but I enjoyed it. The EV-400 Epoxy varnish really shines!
- Attachments
-
- Floor board ready for sanding and finishing.
- normal_SAM_0158.JPG (73.49 KiB) Viewed 4159 times
-
- Polyfiber EV-400 really shines.
- normal_SAM_0164.JPG (63.85 KiB) Viewed 4159 times
Scott Plischke. Building Hatz Classic #86 from plans. See http://www.thehatz.com
-
PoconoJohn
- Posts: 133
- Joined: Tue Mar 06, 2012 3:57 pm
Re: HC #86 Update
I enjoy the photos on your website; they help a lot. Looking good there Scott.
John Cronin
HC 149
HC 149
-
jwhanson
- Posts: 96
- Joined: Tue Mar 16, 2010 11:55 pm
Re: HC #86 Update
Here is a suggestion that worth adding on the Classic with the stepped floor boards.
John Hanson
John Hanson
- Attachments
-
- Heel Plate01 03-06-05.jpg (388.1 KiB) Viewed 4135 times
-
splischke
- Posts: 115
- Joined: Thu Mar 18, 2010 8:41 pm
- Contact:
Re: HC #86 Update
Great idea and easy to implement. Thanks!
-Scott
-Scott
Scott Plischke. Building Hatz Classic #86 from plans. See http://www.thehatz.com
-
Bitshifter
- Posts: 203
- Joined: Thu Aug 02, 2012 5:12 pm
- Location: Avondale Pa
- Contact:
Re: HC #86 Update
Can anyone explain the reason that the floor is higher in the rear of the Classic. To me the step seems to create a problem with the ruder pedals. I like the ramp suggestion but why not just make both floors the same elevation. Is there any interference that I am not seeing?
Ed White
HC 154
"In life 10% wrong is failure, in school it's an A"
HC 154
"In life 10% wrong is failure, in school it's an A"
-
dougm
- Posts: 498
- Joined: Wed Mar 17, 2010 2:39 pm
- Location: Douglas, MA
- Contact:
Re: HC #86 Update
The raised floor provides clearance for the aileron push tubes which run under the floor.
Doug
Building Hatz Classic s/n 093 & Rotec R3600
Hatz Webmaster
Building Hatz Classic s/n 093 & Rotec R3600
Hatz Webmaster